This Week in the Gnarls League, Part 3

vs Danny, part one.

Last week I was in a three-way tie for first in league, and on Monday I got in the first game of this week against one of the people I was tied with: Danny and his Cryx.  My first few trips to the FLGS for Thursday night Warmahordes I played against new or inexperienced players (which seems to apply to 50-60% of the regulars), including what was one of the first handful of games Danny played.  A nice guy who's eager to learn, I've kept an eye on Danny since then to see how he develops.  This game was the first since that initial game months ago and was a good opportunity to see first-hand how Danny has progressed (after a trip to Templecon no less).  We played at 50 points and I fielded the same Aby list I played last week (Typhon, Carni, Seraph, Angelius, Raek, 4 Shredders, 2 Forsakens, and a Shepherd).  I was concerned about facing 50 points worth of Cryx infantry, but fortunately the reality was slightly different as Danny fielded eSkarre with the Deathjack, Defiler, max Bane Thralls with UA and Tartarus, max Satyxis with UA and their solo, Darragh Wrathe, two Pistol Wraiths, and Saxon Orrik.  Our scenario was Whirling Gauntlet, which proved to be interesting.

Kovnik Joe Ready, Objectives WIP #2

Inspiration is available again.

I hadn't planned on painting today, but when I took a look at Joe to see how much was left to do I found the list wasn't that long.  After a brief bit of detail work and a wash, Joe is finished and no doubt eager to be back on the field.  Unfortunately it's raining, with occasional deluges, here in the DMV today, so Joe will have to wait a bit for the first pass of varnish.  Once that pass goes through my opponents will once again have the opportunity to experience the firepower of a fully armed and operational (and painted!) Death Star battle station.

When I sit down to make fully painted lists, I often run into the problem of having the WGI done, but not Joe.  This has less to do with it being hard to make a list that doesn't feature the full Death Star (really not that hard, Khador has plenty of other options), but rather that the WGI are the only "core" infantry unit that I have painted.  (I define "core" Khadoran infantry as Winter Guard Infantry, Kayazy Assassins, and Iron Fang Pikemen.  I have the Kayazy but they aren't painted, and I have no IFP yet.)  I've gone on before about how Khador, and Warmachine in general, doesn't support multiple jacks very well, so this lack of infantry is a large problem.  While Joe isn't absolutely required for the WGI, it's as close as possible.  He just does so much for his two points that it's all but impossible to leave him in the bag if there's any sort of Winter Guard on the table, much less the WGI.  He puts the "super" in "super solo."

Carnivean WIP #4, Starting Objectives

All but done.

The Carnivean is all finished except for the base, hence the WIP label.  I went with all the options listed in the last WIP post, namely orange edge highlighting with brown tips and orange barnacles.  The results are most pleasing.  The base is unfinished as I've yet to decide how to base the army, though I'm leaning towards fairly simple snow bases.  My only reservation there is that the scheme is already on the light side, so adding white base will only make it that much lighter.  Then again, if the bases are dark they might draw attention away from the actual models.

This Week in the Gnarls League, Part 2

Against Jason.

Week two of the Gnarls league wraps up today, but for me it finished yesterday with my third game.  Let's start at the beginning.  The first game was Thursday against Jason, a regular Menoth player who I had not yet faced off against.  I ran a newish Absylonia list with Typhon, a Carnivean, a Seraph, four Shredders, and a pair of both Shepherds and Forsaken.  Jason used Amon with a horde of light jacks, 8 in all, with a pair of min choirs and some wracks.  The scenario was Hold the Line, one that I enjoy for its straight-forwardness.  As usual when facing a new caster/army, I read the cards and took note of abilities, then promptly forgot or underestimated them.  Synergy caught me with my pants not down, but off and in another room.  I lost Typhon and the Carni, both undamaged, on the same turn and that was about it.  I almost shot down Amon with the Seraph, then couldn't quite manage to get Aby in charge range of him.  This game was a fairly ugly case of learning by taking it in the face for me, but that knowledge would come in handy in the next game.

Carni WIP #3, A Crossroads

Pretty much how the scheme will work out.

The Carnivean stomps on towards completion.  I probably could have finished it today had I pushed it, but as previously noted I have others things on the plate that preclude such a push.  The base color (I should find a better term for that as it's not really a basecoat, maybe midtone?  Also need something better than upperplates) on the upperplates got finished, along with a first highlight.  One more layer of highlights and I'll call it finished.  That's the problem though: where to take the highlights.  My initial plan was to use orange for the final highlight, and I probably will end up doing that, but looking at Cloudfang's Orange Blight tutorial makes me curious about "highlighting" with a darker color to show older, harder growth on the plates.  What I'd like to do is the orange highlight, then do an edge highlight (as much as possible on something as organic as the Carni) with a darker brown, perhaps the VGC Leather Brown that was the initial layer on the upperplates, then round the whole thing out with a nice wash of some sort.  My concern is that there may be too much going on if I do all those steps.  Once again I summon opinions from you, oh Internet who is full of little but opinions.  Go with orange, brown, wash?  Skip the orange and/or brown?  Dark wash (Badab Black), light(Ogryn Flesh), or somewhere in between (Devlan Mud)?  I won't be getting back to the Carni until next week, so you have some time to consider.

P.S.:  Had an idea just now, moments after finishing the post.  Perhaps I'll do some of the little bumps and juts in a bright orange.  That way I could still work in the overt orange without making half the model look like a pumpkin...

Carnivean WIP #2

Getting there.

Lots of progress yesterday on most hobby fronts.  Let's start with the painting, since I have a picture of that.  The various plates got washed, then underplates were finished, and the upperplates got a start.  Turns out those will take longer than anticipated.  I didn't quite finish the initial coat on the yesterday, but with just those plates to finish I'm relatively confident that I can get the Carni done today.  Then again, there's plenty on the docket for today that isn't painting, so I can't sink the whole day into it despite my desire to do just that.  The picture on the left isn't from the best angle progress-wise, but it was the only angle I could get that showed the underplates.  Just the one arm and the rest of the upperplates need the initial coat of brown, the rest of them are ready for highlighting.  I'll do a breakdown of what colors went where when I'm done with the whole thing, as much for me as for anyone else.  I'm pleased with how it's turning out so far, but final judgement is reserved until the end as always.

I Bleed For My Hobby, Carnivean WIP #1

So many pins...

While getting curb-stomped by EV on Tuesday I noticed I had some skin peeling off my left index finger.  What caused this wasn't immediately apparent.  At the time I thought perhaps it was from scraping mold lines, though in that case it should have been on the thumb and on my right hand.  Yesterday I figured out what the cause was: pinning.  To be more accurate, pinning spiky Legion models.  In constructing Typhon and the Raek you see on the left, I did a lot of pinning.  A whole lot of pinning.  More pinning than I've ever done on a pair of models before.  Except for one of Typhon's heads, every piece on both models has at least one pin in it, for a grand total of twenty four (24) pins between the two.  Greenstuffing is still underway.  The bad news is that I rubbed off a couple layers of skin and drilled straight into my thumb twice.  The good news is that I should never have to worry about these models coming apart, even if I manage to pick up Typhon by one of his teeny T-Rex arms.  Hopefully the taste of blood they got makes them more vicious on the table.

Torch Finished, Beasts Arrive, LotR?

Ready to rip and burn for your entertainment.

There wasn't much left to do on Torch, as I mentioned in a previous post, so today I did those few things and called it done.  The 5th Border Legion icon didn't turn out as well as it did on Black Ivan.  I'll put a little of the blame on the scheme since the gold on black really popped, but mostly I'll fault my own brush work.  The spikes on the bottom of the 5 are a bit chunky, the arrows in the corners don't look quite right, and in retrospect a bit of black lining would have helped as well.  All that is academic at this point since Torch has a coat of varnish drying at the moment, and it's just nitpicking really.

This Week in the Gnarls League, Part 1

Not these Gnarls.

The Gnarls League started this week and despite some scheduling difficulties (read: hockey on Thursday night) I managed to get my three games in for the week.  These seasonal leagues have intrigued me since I first heard about them.  The idea that some models are taken out and replaced with variations on them is a novel one.  This year's leagues take the novelty a step further by allying two factions (Legion pairs up with Mercs for the Gnarls)  and allowing them to field each others' seasonal model.  The Merc's model (grape shot cannon) doesn't do much for me, and a lot of the pairings are odd, but it's a good way to add in some variety without actually adding new pieces to the game which astute readers will remember is a plus for me.  Looks like I've finally encased my first picture in text, so on to the mini battle reports.

Joe WIP #4, Torch WIP #3

Just needs a little more work.

I've been waffling about what to post for a few days, with the result of not posting anything.  Instead of continuing this trend, I decided to just do a painting post and let the rest of it keep simmering.  Most of the week has been spent reading, so there hasn't been a whole lot of painting.  On Friday I decided I had to get some work done on something.  What did I pick?  Rivets.  There was some other little work, doing the few black areas, some bronze, starting on the base.  As a result, Torch is almost done.  There are some lingering details I haven't gotten to and a couple I've missed, but I could call Torch finished right now (base aside) and be happy with it.  That won't happen as I still have plans for a 5th Border Legion logo on the top hatch (like Black Ivan) and I'm not ready to let the other details slide just yet.  It's awful nice to be all-but finished though.  I'm always amazed at how quick jacks paint up compared to infantry.  You'd think the larger model would take longer, yet I can do a jack in a day or two while infantry takes about a week.  Hopefully beasts paint as quick as jacks.  If so, I could (in theory) get all my Legion painted up before the league is finished.